Water-based spray adhesive boasts high solid content, strong initial adhesion, long-lasting viscosity, high cost-effectiveness, professional odorlessness, and direct factory sales. It meets national environmental protection standards, provides one-stop consultation services, is favored by users, and is suitable for a wide range of bonding materials, exhibiting excellent adhesion to foam. Ideal for swivel chairs, mattresses, sofas, and other upholstered furniture.

It is understood that many water-based spray adhesives currently on the market have issues such as inconvenient operation, high glue consumption, unprofessional odor, and unreasonable pricing. We recommend choosing a water-based spray adhesive supplier that offers a complete service chain, as this helps distinguish the quality of water-based spray adhesives.
 

This single-component water-based spray adhesive is environmentally friendly, possesses excellent heat resistance and plasticizer resistance, and offers instant bonding. Widely used in swivel chairs, high-end cushions, mattresses, thick leather sofas, fabric sofas, and screens. It is an ideal environmentally friendly adhesive used in many industries. The coated upholstered furniture has no residual odor and meets national environmental protection requirements.

Water-based Spray Adhesive Precautions:

1. Do not mix with other adhesives. Stir well before use, store in a sealed container, and avoid solvent evaporation causing increased viscosity and deterioration. Avoid direct sunlight; store in a warehouse at 20-30℃.

2. When choosing water-based spray adhesive, prioritize quality over price. Some furniture companies believe that higher prices equate to better quality, or lower prices mean lower quality. These statements are very one-sided, causing some furniture companies to lose out. Choose a well-known, proven water-based spray adhesive. Each can meets national quality standards, and every data point is traceable.

3. After spraying the two-component water-based spray adhesive, allow it to sit for a while to ensure complete evaporation of moisture.

4. When spraying, pay attention to the bonding time in humid weather and ensure that the materials and surfaces to be bonded are dry; otherwise, the bonding effect will be poor.

5. When using this product, spray evenly onto the surface to be bonded. However, the surface to be bonded must be dry, clean, and oil-free before spraying; otherwise, it will affect the optimal bonding effect.

6. After spraying, at a temperature above 20℃, wait for 1 minute or until the adhesive is no longer sticky (adjust the waiting time according to the work environment) before applying pressure to bond. Ensure accurate and one-time bonding of materials for stable and firm results.

7. At temperatures below 10℃, extend the waiting time. Or, if you need to meet operational process requirements, please contact our engineering department for adjustments to ensure optimal adhesive performance!

8. In humid weather, master the optimal bonding time and ensure that the materials and surfaces to be bonded are dry; otherwise, it will lead to poor bonding results.

Email:
shduobang@163.com

Phone/WeChat:
+86-13651837338