Duobang Polyurethane Glue
Model: DA6100A
Duobang polyurethane glue, DA6100A main uses: composite fabrics, sponge and fabric composite, leather composite, leather and microfiber composite, aluminum foil and non-woven fabric composite, footwear composite, knitted fabric, EVA, PVC, needle cotton patch, cloth patch, cloth patch yarn, yarn patch yarn, sponge composite factory, fabric composite factory, PVC composite factory, bonding factory
( Cotton-to-cotton for bra cups , Cotton patch , Cloth patch ) Suitable for underwear bonding , Cotton patch , Cotton to cotton . Suitable for cloth, foam, PVC 、 PU , rubber and other materials
Composite .
Duobang polyurethane adhesive DA6100A Excellent bonding strength, water resistance ( Water washable 50 times ) Solvent resistance, heat resistance, formaldehyde and free phenol free
Excellent softness, no yellowing (4 Grade and above ) Complies with the latest European environmental protection requirements.
Transparent or slightly cloudy liquid 23 ° C/20rpm/S2: Approximately 150mPa.s Approximately 43%
Duobang polyurethane adhesive DA6100A Can be used as a single component , It can also be used with a curing agent, spraying or roller coating is also possible . At 23 ° C Under 5-35°C 10-25°C
Spraying or roller coating
10-30g/m2, (1.524 Meter width 1KG Glue approximately glue application 25 Meters -35 Meters, depending on different requirements ) At 20-25 ° C 、80% Relative humidity, it is recommended 12 Hours before unwinding and slitting, 1 Days later, thermoforming can be carried out. In high humidity and high temperature environments, the curing time can be shortened .
DA6100A This product contains ethyl acetate solvent and trace amounts of different Isocyanates, avoid inhalation and skin contact during operation,
When using with a curing agent, stir well ; If the adhesive is too thick, anhydrous ethyl acetate can be used Adjust the viscosity with ethyl acetate , Before the adhesive cures, ethyl acetate or MEK Clean the equipment
When hand spraying, the spray gun nozzle should not be too close to the surface of the sprayed object, the glue is easy to clump, uneven Uneven or penetrating into the object. The spray gun nozzle should not be too far from the sprayed surface, which is easy to waste glue. Construction Suggest distance 25-50cm。
After using the glue, clean the equipment with ethyl acetate or ethyl acetate as soon as possible ( Spray gun Or glue tank ) In the exposed air environment, 3 Hours, the glue must be cleaned immediately.
20kg Iron bucket 。
At 5~30 ° C In the environment, unopened products can be stored for 6 Months ; Unopened and unused products Need to be sealed immediately.
Keyword
Polyurethane adhesive
Contact Us
Hotline:
Email: